Two pieces are easy to print and use as I wasn't able to find a good mount for my purposes.
I used this as a custom project for my SourceOne v5 7-inch long range. It works perfectly but can also be used on a 5" as they have the same body; only the legs are shorter.
My build
The Specs: Source One v5 7" 🌟
🔧 Frame: Original TBS Source One v5 7 inch
🛠 Stack: Skystars KM65A + HAKRC F722 MPU6500 (works fine!)
⚙️ Motors: GEPRC 2807+ 1350kv
📡 RC: HGLRC ELRS 2.4 (I found its better than Happymodel)
📺 VTX: DJI VISTA + iFLIGHT Albatros LR Antenna
🧭 GPS: HGLRC M10
🧩 TPU: All self-made (Antenna + GPS + GoPro 11 Mini Mount)
🚨 I used two 680u capacitors with motor wire as all previous builds was melting capacitor legs on higher current or on bad PIDs 🚨 🥫🥫
Visit my insta :)
| SO57_MY_gps100ELRS.stl | 170.3KB | |
| SO57_MY_SMA2.stl | 118.2KB |
