Description Files (8)

Summary

HexaLeS Lamp

Stands for HexaLedStrip Lamp
This is a remix of the Hexa Line Lamp of Khurramst that is smaller and ready for the installation of a Wemos D1 Mini with WLED.
You can build the lamp in several shapes with different lengths from hexagon to hexagon. The zig zag in the picture is just an example.

For the full build with WLED you'll need:

3D printed parts
WLED compatible 5V LED Strip (See: https://kno.wled.ge/basics/compatible-hardware/ - I recommend SK6812)
Wemos D1 mini
Some wires (>= 0.5mm² depending on the length of your LED strip)
(USB) Power adapter with 5V and >= 2A depending on the length of your LED strip
(USB) Cable (long enough to reach the power adapter)
For long LED strips: fuses (See: https://kno.wled.ge/advanced/wiring/ )
Maybe some hot glue

Printing tips:

Print without support
Try using concentric pattern on the visible layer
Layer height of 0.18 - 0.28 is enough

Connector_LED_Strip_195.stl	246.0KB
Connector_LED_Strip_225.stl	281.9KB
Connector_LED_Strip_250.stl	308.5KB
ESP_Connector.stl	152.6KB
Hexa_Bottom.stl	115.7KB
Hexa_ESP.stl	100.7KB
Hexa_Lamp.f3d	410.6KB
Hexa_Top.stl	217.8KB

HexaLeS Lamp 3D Printer Model

Summary

HexaLeS Lamp

For the full build with WLED you'll need:

Printing tips:

Tags

You might also like