Wanted to go solder-less, but still have the option to rearrange. Also bought reflective panels, cut them to shape and installed them to give more uniform lighting.
Things I changed:
- Removed RGB light clips - Let the 3m tape do the work.
- Removed circular holes on the back piece.
- Added rectangular holes on the bottom of the back piece so I can fit the 4 pin RGB connectors through the bottom and under the reflective panels.
- Notched out a small piece of the hexagon backing to make room for the 4 pin RGB connector. This is where a new panel will connect to the previous one.
- Added a small rectangular hole in the "starter" piece. This is where you can slide your RGB lights through to the connector on the power supply.
- Resized the connectors, as the originals were too big and wouldn't fit.
- Slimmed down the mount piece so it doesn't interfere with reflective panels.
Other materials:
