The file 'Hexagon(hex Key) Handle “snap-lock” Wedge Design Allen Wrench With Modular Holders, Complete Set 1.3mm Through 10.0mm 3D Printer Model' is (STL,zip) file type, size is 11.6MB.
These are tight fitting handles that feature a "wedge-lock" design. These parts shouldn't require any post processing at all, just print the parts and seat the Allen wrench by pulling it tightly into the wedge. This design was inspired by a 4 piece version that I found to be loose and the end caps didn't screw on. This one piece design is simple and the wrench is nice and tight. Some things just work!
Update: Added wrench size identifier text on each individual handle
Update 2: Added 4.5mm, 5.5mm, 6mm, 7mm and 8mm handles. Currently working on a holder for all 11 wrenches.
Update 3: Added 11 wrench holder
Update 4: Added modular wrench holders so you can customize your set for yourself.
Update 5: Stay tuned for "v1" handles with lock tab as shown, you will need to tap the wrench down tightly past the tab to seat it correctly using a screwdriver and hammer
Update 6: I added the Solidworks files in a zipped folder for customization purposes
Update 7: I added sizes 1.3mm, 9mm and 10mm
Update 8: I added 3.5mm
| 1.3mm_handle.STL | 318.1KB | |
| 1.3mm_holder.STL | 110.8KB | |
| 1.5mm_handle_v1.STL | 308.5KB | |
| 1.5mm_holder.STL | 101.6KB | |
| 10mm_handle.STL | 208.2KB | |
| 10mm_holder.STL | 122.8KB | |
| 2.5mm_handle_v1.STL | 321.9KB | |
| 2.5mm_holder.STL | 112.2KB | |
| 2mm_handle_v1.STL | 297.5KB | |
| 2mm_holder.STL | 115.3KB | |
| 3.5mm_handle.STL | 287.1KB | |
| 3.5mm_holder.STL | 123.5KB | |
| 3mm_handle_v1.STL | 267.1KB | |
| 3mm_holder.STL | 126.6KB | |
| 4.5mm_handle_v1.STL | 256.8KB | |
| 4.5mm_holder.STL | 103.2KB | |
| 4mm_handle_v1.STL | 236.0KB | |
| 4mm_holder.STL | 106.3KB | |
| 5.5mm_handle_v1.STL | 251.6KB | |
| 5.5mm_holder.STL | 114.3KB | |
| 5mm_handle_v1.STL | 242.6KB | |
| 5mm_holder.STL | 117.5KB | |
| 6mm_handle_v1.STL | 225.4KB | |
| 6mm_holder.STL | 119.0KB | |
| 7mm_handle_v1.STL | 202.8KB | |
| 7mm_holder.STL | 105.0KB | |
| 8mm_handle_v1.STL | 229.2KB | |
| 8mm_holder.STL | 132.1KB | |
| 9mm_handle.STL | 205.3KB | |
| 9mm_holder.STL | 118.8KB | |
| allen_wrench_holder.STL | 508.2KB | |
| Allen_wrench_Solidworks_files.zip | 9.8MB | |
| Left_end.STL | 47.9KB | |
| right_end.STL | 47.9KB |
