My fully-functional hexagonal prism twisty puzzle. The top and bottom layers can turn by 60 degrees and the side layers can turn by 180 degrees.
To make this puzzle, print each part by the number indicated on the filename:
The side center caps are extremely tight, and it may be necessary to use a blunt object like the handle of a screwdriver to get them to click in. The top center caps can barely fit it, but they may need to be sanded down to make them level with the rest of the center.
You need 8 M3 screws and 8 springs. Standard 3x3 screws can be used, and they can be bought here:
https://thecubicle.us/moyu-weilong-hardware-p-1666.html
The stickers on the 3x3 side faces are standard 57mm 3x3 stickers. The top and bottom stickers can be cut from the sticker template.
| core_x1.stl | 489.9KB | |
| corner_x12.stl | 212.9KB | |
| middle_edge_x6.stl | 238.4KB | |
| side_center_cap_x6.stl | 251.3KB | |
| side_center_x6.stl | 464.8KB | |
| top_center_cap_x2.stl | 156.3KB | |
| top_center_x2.stl | 329.3KB | |
| top_edge_x12.stl | 231.7KB | |
| top_stickers.pdf | 104.1KB |
