A printable 6" diameter Dobsonian telescope, it is designed to use vslot rails length depends on f rating of primary mirror.
This is currently in process and will have a adjustable primary mirror mount, an adaptable focuser .
As you may noticed a lot has been done, there are only a few items remaining before the design is usable, first eyepiece plates to mount cameras, raspberry pi w/ cam, and eyepieces. second is the brackets to hold the spider vane, and lastly Vslot brackets to allow for 8" 10" and maybe 12" for those with the glass.
The design will allow the only thing that needs to change in dimensions is the arms on the vslot brackets, and the platter arms which currently support 6"-8", an another set will be made to support 8-10" and 10-12".
I will also post instructions on assembly with parts breakdown and blowout.
Lastly I plan to make a variety of accessories, but I encourage others to make their own, I am trying to make a telescope platform, that can scale and piece together like legos while being fully printable on a 150 x 150 print bed.
| adjustmentKnob.scad | 982.0B | |
| adjustmentKnob.stl | 37.7KB | |
| deltaBridge.scad | 1.6KB | |
| deltaBridgeV2.scad | 1.6KB | |
| deltaBridgeV2.stl | 87.4KB | |
| focMount.scad | 2.8KB | |
| frameBridge.scad | 1005.0B | |
| frameBridgeV2.scad | 1.0KB | |
| frameBridgeV2.stl | 139.9KB | |
| frontPanel.stl | 299.9KB | |
| Hexascope.scad | 1.6KB | |
| HexascopeV2.scad | 2.0KB | |
| Pentascope.scad | 1000.0B | |
| platterArm.stl | 44.7KB | |
| primaryPlatter.scad | 2.5KB | |
| primaryPlatter.stl | 147.2KB | |
| rearPanel.stl | 85.9KB | |
| secondaryMount.scad | 3.6KB | |
| secondaryMount.stl | 128.3KB | |
| spiderBracket.stl | 55.9KB | |
| Spooler.scad | 904.0B | |
| Spooler96.scad | 904.0B | |
| vslotBracket.scad | 942.0B | |
| vslotBracketdelta.scad | 637.0B | |
| vslotBracketdelta.stl | 107.1KB | |
| vslotBracketdeltaV2.scad | 553.0B | |
| vslotBracketV2.scad | 1.2KB | |
| vslotBracketV2.stl | 79.0KB | |
| WFOV_COL_FILTER.scad | 1.2KB | |
| Write.scad | 12.7KB | |
| _M5x16.scad | 2.9KB |
