Hex Terrain Tiles 3D Printer Model
The file 'Hex Terrain Tiles 3D Printer Model' is (stl,zip) file type, size is 45.0MB.
The file 'Hex Terrain Tiles 3D Printer Model' is (stl,zip) file type, size is 45.0MB.
***UPDATE 2021-02-19
I added a blaze hex marker. It's a fiery ring, scaled to allow it to fit within a 4" / 100mm hex, with a hollow center to allow terrain or miniatures to fit within. "And it burns, burns, burns, the ring of fire..."
***UPDATE 2020-10-12
I added several different stone bridge hexes for crossing the river!
***UPDATE 2020-09-30
I added a rubble hex and a cobblestone hex (10mm scale). I also added a hexagonal stone tower that precisely fits a 4" hex (again 10mm scale).
***UPDATE 2020-08-26
I added hill hexagons with a 1" (25mm) height.
A first pass at making some terrain to go with the Kallistra wargaming tiles that I have. I cannot endorse their hex tiles enough. They're my favorite wargaming terrain product:
The hex terrain is 100mm from flat edge to flat edge. I plan to make river/road hexes, slopes, and any other single-hex terrain that takes my fancy. Feel free to make requests.
I will add additional slope hexagons to this collection (for 1, 2, and 3 "high sides" slopes). The first set of slopes will mate to a single hex tile height. I may later make slopes to match up with higher tile stacks, if there's demand.
I will also add various river/road curves, junctions, and end caps. May also make some single-hex hills, ponds, marshes, etc.
| 0a-complex-v2.stl | 1.2MB | |
| 1a-complex-v2.stl | 1.2MB | |
| 25mm_Height.zip | 7.3MB | |
| 2a-complex-v2.stl | 1.2MB | |
| 2b-complex-v2.stl | 1.2MB | |
| 2c-25mm-fixed.stl | 1.2MB | |
| 2c-complex-v2.stl | 1.2MB | |
| 2c-fixed.stl | 1.2MB | |
| 3a-complex-v2.stl | 1.2MB | |
| 3b-complex-v2.stl | 1.2MB | |
| 3c-complex-v2.stl | 1.2MB | |
| 3d-complex-v2.stl | 1.2MB | |
| 4a-complex-v2.stl | 1.2MB | |
| 4b-complex-v2.stl | 1.2MB | |
| 4c-complex-v2.stl | 1.2MB | |
| 5a-complex-v2.stl | 1.2MB | |
| 6a-complex.stl | 1.2MB | |
| blaze-hex.stl | 12.5MB | |
| bridge-large-1.stl | 4.4MB | |
| bridge-large-2.stl | 5.0MB | |
| bridge-large-3.stl | 4.5MB | |
| bridge-medium.stl | 4.2MB | |
| bridge-small.stl | 2.3MB | |
| cobble-hex.stl | 1.5MB | |
| flight-stand.stl | 21.6KB | |
| half-hex.stl | 450.1KB | |
| hex-template-2mm.stl | 1.1KB | |
| hex-template-3mm.stl | 1.1KB | |
| hex-template.stl | 1.1KB | |
| hex-tower-bottom.stl | 4.8MB | |
| hex-tower-top.stl | 3.9MB | |
| river-bend-v2.stl | 391.6KB | |
| river-end.stl | 1.5MB | |
| river-half.stl | 227.0KB | |
| river-straight-fixed.stl | 391.6KB | |
| river-y-1.stl | 391.6KB | |
| road-intersection.stl | 11.6KB | |
| road-straight.stl | 4.0KB | |
| road-y-a.stl | 13.2KB | |
| rubble.stl | 12.0MB | |
| triangle-filler.stl | 200.3KB |
