Hex Stud Screws Nut / 六角螺柱 3D Printer Model
The file 'Hex Stud Screws Nut / 六角螺柱 3D Printer Model' is (STL) file type, size is 12.8MB.
The file 'Hex Stud Screws Nut / 六角螺柱 3D Printer Model' is (STL) file type, size is 12.8MB.
https://www.youtube.com/watch?v=IseCzlG1D6c&feature=youtu.be
延續了幾個月前的螺絲螺帽測試，這次將兩者結合在一起，六角螺柱測試結果非常成功，列印成功率的重點在於不能開支撐，螺紋地方有支撐的話會非常麻煩的，以及越小的螺絲要印越慢，這是為了讓它有足夠時間冷卻，這樣子成功率就會變高囉! 有興趣的人可以去點連結下載來製作看看。
Continuing the screw and nut test a few months ago, this time combining the two, the hexagonal stud test result is very successful. The focus of the printing success rate is that the support cannot be opened. If the thread is supported, it will be very troublesome, and The smaller the screw, the slower it will be printed. This is to allow it enough time to cool, so that the success rate will become higher! Interested parties can go to the link to download and make a look.
| M10_hex_stud.STL | 5.2MB | |
| M12_hex_stud.STL | 6.2MB | |
| M5_hex_stud.STL | 4.8MB | |
| M6_hex_stud.STL | 4.0MB | |
| M8_hex_stud.STL | 5.6MB |
