Hex Pot version 2.0.
Minor Changes to both pot and plate,
-Added 30 deg chamfer to the base for easy removal after print.
-Added radius at the bottom of pot and plate.
-Drain holes added radius for better drain.
Print without support.
Print resolution : 2.0mm
Infill : 10 to 20%
Hex pot thickness 2.5mm
Plate thickness 2.0mm
| Hex-Plate-ver2.0.stl | 8.1KB | |
| Hexpot-60mm-ver2.0.stl | 93.6KB |
