Hex Panel Baskets 1 3D Printer Model
The file 'Hex Panel Baskets 1 3D Printer Model' is (stl) file type, size is 2.7MB.
The file 'Hex Panel Baskets 1 3D Printer Model' is (stl) file type, size is 2.7MB.
I made the hex panels using XYZAidans Honeycomb Pattern Generator https://www.thingiverse.com/thing:3017082 & Tinkercad
5 sizes in 2 heights each (LxWxH)
80x80x25
80x80x50
100x100x25
100x100x50
120x120x25
120x120x50
140x140x25
140x140x50
140x80x25
140x80x50
They print good enough for me at .3mm layers. I'm sure they'd be even better at .2mm. All panels are 1.6mm thick. All walls tilted out at a 10 degree angle.
.3mm layers
.8mm walls, top, & bottom = a solid part with no infill
no support
also check out Hex Panel Baskets 2 https://www.thingiverse.com/thing:3723407
| hexpanel_basket_100x100x25.stl | 881.4KB | |
| hexpanel_basket_100x100x50.stl | 1.2MB | |
| hexpanel_basket_120x120x25.stl | 1.1MB | |
| hexpanel_basket_120x120x50.stl | 1.5MB | |
| hexpanel_basket_140x140x25.stl | 1.4MB | |
| hexpanel_basket_140x140x50.stl | 2.0MB | |
| hexpanel_basket_140x80x25.stl | 1003.8KB | |
| hexpanel_basket_140x80x50.stl | 1.4MB | |
| hexpanel_basket_80x80x25.stl | 629.7KB | |
| hexpanel_basket_80x80x50.stl | 920.4KB |
