Herrnhuter Stern 3D Printer Model
The file 'Herrnhuter Stern 3D Printer Model' is (stl) file type, size is 459.00 KB.
The file 'Herrnhuter Stern 3D Printer Model' is (stl) file type, size is 459.00 KB.
The Herrnhuter Stern is a typical Christmas decoration found all over Germany. The originals were made out of paper and held together by small pins. This one is a bit different but has the same overall style.
The models are designed to be printed in Vase/Surface mode with continuous extrusion. This makes it printable on almost any machine. I printed them using red Colorfab XT because its a good color and a bit more heat resistant. Heat resistant is good because I used hot glue to hold all the parts together and have a small lightbulb mounted in the middle.
You'll need to print 17 of the larger 4 sided points and 8 of the smaller 3 sided points for a complete Herrnhuter Star. I had no problems printing these and overall print time was about 17 hours.
Note: Printing 17 larger 4 sided points will leave a small opening to place a small light bulb. To fully enclose the star you will need to print 18 total.
| Star3.stl |
| Star4.stl |
