Combined WarHawk8080 and Jacoza's designs to make this awesome stock for my rough rider. I added a cylinder holder for the people who have 22lr and 22wmr cylinders and want an easy spot to store the second one. I extended the grip portion to better fit me. I like the sight to be slightly further away.
Use a 3.5mm bolts, one 35mm long and one 28mm long.
The grip pushes on/off from the back.
I'd recommend using 15 minute epoxy to assemble. Put epoxy on the grip then attach to the 22 with bolts to insure proper alignment. Make sure as to not put to much epoxy and end up permanently attaching it to the 22.
HAPPY PLINKING!!!
P.S. I use Tinkercad
HUGE THANKS TO JACUZA AND WARHAWK8080!!! Couldn't have done it without you two!
| heritage_rough_rider_stock_butt_left.stl | 209.0KB | |
| heritage_rough_rider_stock_butt_right.stl | 226.6KB | |
| heritage_rough_rider_stock_grip_left.stl | 533.6KB | |
| heritage_rough_rider_stock_grip_right.stl | 443.3KB | |
| heritage_rough_rider_stock_long_grip_left.stl | 310.1KB | |
| heritage_rough_rider_stock_long_grip_right.stl | 250.3KB | |
| heritage_rough_rider_stock_middle.stl | 177.4KB | |
| heritage_rough_rider_stock_middle_with_drum_holder.stl | 188.2KB | |
| heritage_rough_rider_stock_pin.stl | 29.0KB |
