Heltech V3 And Rak Wireless Wisblock 19007 And 18650 Holder For Electrical Box Case 3D Printer Model
The file 'Heltech V3 And Rak Wireless Wisblock 19007 And 18650 Holder For Electrical Box Case 3D Printer Model' is (stl) file type, size is 811.8KB.
The file 'Heltech V3 And Rak Wireless Wisblock 19007 And 18650 Holder For Electrical Box Case 3D Printer Model' is (stl) file type, size is 811.8KB.
This is a case for the 19007 Wisblock by rak wireless.
https://rakwireless.kckb.st/hamspiced
It is made to fit into a 5.9 x 3.9 enclosure from amazon:
https://a.co/d/2B922KQ
Will hold 1 18650 and has some area to hold the GPS antenna and BLE antenna.
these tabs should fit the case for the 18650 holder
edits:
Added a version without the 18650 holder to accomodate flatpack batteries. But also perfectly fits a dual 18650 battery pack: https://a.co/d/eExW0Wc
Aligned Mounting holes on both designs
Removed meshtastic name for approved logo to align with Meshtastic's trademark guidelines
Added carrier for Heltec V3's. This carrier has a nub at the entrance for the heltec to keep it locked in place. if the nub is too aggressive let me know and ill edit it.
Added a completely blank carrier panel to add additional carriers as the models becme available.
Changed logo to MPowered to remain compliant with copyrights
Added standoffs for the waveshare solar charge controller
https://www.waveshare.com/solar-power-manager-d.htm
Big thanks to KC9UNS for makign the Heltec Carrier used in my design.
https://www.thingiverse.com/kc9uns/designs
| Blank.stl | 360.8KB | |
| Heltec_V3_Carrier_Board.stl | 292.4KB | |
| Heltec_V3_Carrier_Board_with_charge_contoller.stl | 231.8KB | |
| LifePoCarrier.stl | 502.1KB | |
| MpoweredRakCarrierBoard.stl | 419.2KB | |
| MpoweredRakCarrierBoardNoBatt.stl | 385.9KB | |
| Rak_Carrier_blank_with_Charge_Controller.stl | 232.1KB | |
| Rak_Carrier_single_batt_with_Charge_Controller.stl | 254.3KB |
