Heltec V2 (and V3, both stl version are provided) Meshtastic LoRa device case.
18650 Li-Ion battery holder included (for longer protected 18650 battery).
I recomend connect some high-gain antenna (some better and bigger than stock one what came with that board).
Both buttons are working with this case (you can click buttons, there are holes-buttons for that).
Indoor use only, it is not mentioned for outdoor usage (unless you will make it waterproof somehow).
Printed with two colors for nicer look:)
Small green dot next to power switch and logo are printed separately and glued in place.
** Edit 14.05.2024
Some users reports that they have problem print top part correctly (button part is fused and not moving clearly) so i have added version with extended button gap (top part).
Also added V3 top and bottom standard version.
Switch used:
50V 0.5A SS12F15 Mini Size Black SPDT Slide Switch
or
Battery contacts used from 18650 battery holder:
ABS 18650 Power Bank Cases 1X
BambuLab X1C
0.2
20 infill
PLA+
no supports
| antenna_spacer.stl | 38.8KB | |
| logo.stl | 181.9KB | |
| MCU_PCB_holder_top.stl | 34.8KB | |
| meshtastic_case_v2_bottom.stl | 113.4KB | |
| meshtastic_case_v2_top.stl | 379.0KB | |
| meshtastic_case_v2_top_extended_button_tolerance.stl | 378.0KB | |
| meshtastic_case_v3_bottom.stl | 113.4KB | |
| meshtastic_case_v3_top.stl | 390.3KB | |
| meshtastic_case_v3_top_extended_button_tolerance.stl | 388.9KB | |
| switch_label.stl | 20.2KB |
