Helmet Wall Stand 3D Printer Model
The file 'Helmet Wall Stand 3D Printer Model' is (STL) file type, size is 3.6MB.
The file 'Helmet Wall Stand 3D Printer Model' is (STL) file type, size is 3.6MB.
I designed this stand for my racing helmet. It attaches to the wall with 2 wood screws into a stud.
I used 6 sets of M4x20mm socket head screws with nuts and washers to hold everything together.
My Print Infill and Layer Settings:
0.4mm Nozzle with 0.32 Layer Height
BASE:
Infill - Grid 50%
Walls - 5
Top and Bottom Layers - 5
Support - No
ARMS:
Infill - Grid 50%
Walls - 5
Top and Bottom Layers - 4
Support - Yes (Needs support on one end)
TOP HAT:
Infill - Grid 20%
Walls - 3
Top Layers - 3
Bottom Layer - 6 (Make sure tab with holes is completely solid)
Support - No
| Helmet_Stand_Arm_Left.STL | 1.2MB | |
| Helmet_Stand_Arm_Right.STL | 1.2MB | |
| Helmet_Stand_Base.STL | 1.4MB | |
| Helmet_Stand_Top_Hat_Left.STL | 2.4MB | |
| Helmet_Stand_Top_Hat_Right.STL | 2.5MB |
