Helmet Wall Mount 3D Printer Model
The file 'Helmet Wall Mount 3D Printer Model' is (stl) file type, size is 60.3KB.
The file 'Helmet Wall Mount 3D Printer Model' is (stl) file type, size is 60.3KB.
The files are saved in the orientation to print them. The wall mount needs to be printed on an angle to ensure strength.
IF YOU PRINT THE WALL MOUNT FLAT, IT WILL SNAP!!
I've had a few fail on me only when it was printed flat. I hold no responsibility if your print fails.
The sections fit a 3/4" PVC pipe in them. Cut the PVC to the lengths that you need them. Secure the pipes with a screw with the provided holes. Add a piece of velcro to the top part and the inside of your helmet to keep it in place.
| helmet_top_mount.stl | 95.0KB | |
| WALL_MOUNT.stl | 98.7KB |
