So, the thingiverse was missing a Hello Kitty themed planter, my gf wanted one, so i made one.
The planter part is 62mm in diameter (2.44 inch) and 56mm in Height (2.2 inch), so
it fits perfectly these mini flower things you get everywhere.
Overall Height is 83mm (3.26 inch)
(printing time around 7 hours @70mm/s)
EDIT: I added a Version for bigger Plants, with smaller Walldimensions (the walls are 2mm thick on the small planters, but 1mm on the medium), and with a bigger diameter of roughly 100mm (3.95 inch)!
Head is only slightly larger! Overall height is about 94mm (3.74 inch) !
(printing time around 10 hours @70mm/s)
EDIT 2: i also added the bigger Version with the same wall thickness as the small one (2mm ~ 0,08inch)!
Happy printing!
| Hello_Kitty_Planter.stl | 309.1KB | |
| Hello_Kitty_Planter_100mm.stl | 317.6KB | |
| Hello_Kitty_Planter_100mm_2mm_walls.stl | 302.8KB |
