Heavy GoPro Base Stand
Fill it with sand or other heavy material.
Screw together.
I have used led bullets and it ways almost half a kilo.
Use preferably a metal screw 15x6mm.
You can print attached 6mm screw, but it may be too weak. Use 5 outer layer and 100% fill for the screw and print 0.1mm layer height and 5-10 degrees hotter than normal to get it as strong screw as possible.
All my GoPro related Things:
GoPro Bike and tripod atachment with quick coupling
https://www.thingiverse.com/thing:4570589
Phone stand with screw and GoPro atachment
https://www.thingiverse.com/thing:4328023
Phone Atachment to Bike with spring damper
https://www.thingiverse.com/thing:4458076
Heavy GoPro Base Stand
https://www.thingiverse.com/thing:4693687
Light GoPro Base Stand
https://www.thingiverse.com/thing:4696458
DSLR camera Stand with GoPro atatchment
https://www.thingiverse.com/thing:4424068
GoPro Attachment system
https://www.thingiverse.com/thing:4696725
Ring Light
https://www.thingiverse.com/thing:4696747
Sefie stick. Long. Vasemode.
https://www.thingiverse.com/thing:4678212
GoPro 360 coupling
https://www.thingiverse.com/thing:4697342
| BottomCase.stl | 284.7KB | |
| GoProAtachmentFemale.stl | 920.5KB | |
| Screw.stl | 565.1KB | |
| TopCover.stl | 225.2KB |
