Heatwave 3d Printable Typeface 3D Printer Model
The file 'Heatwave 3d Printable Typeface 3D Printer Model' is (stl) file type, size is 1.2 MB.
The file 'Heatwave 3d Printable Typeface 3D Printer Model' is (stl) file type, size is 1.2 MB.
This is a typeface designed to be 3d printed or rendered-
The design uses 1mm wall thicknesses which seem to print very nicely on all 3d printers, and the simple and iterative appearance mimics heat sinks.
After making a few I couldn't stop until I had made them all because they were fun to play and interact with!
Each block is about 2" square. I have also included a few alternate letter designs. You can follow some of the progress of how I changed the letters on my instagram account for #3dprintaday.
Enjoy!
| 001S2.STL |
| A__rebuilt_.stl |
| B__rebuilt_.stl |
| C_2__rebuilt_.stl |
| C__rebuilt_.stl |
| D_2__rebuilt_.stl |
| D_3__rebuilt_.stl |
| E_2__rebuilt_.stl |
| E__rebuilt_.stl |
| F_2__rebuilt_.stl |
| F__rebuilt_.stl |
| G_2__rebuilt_.stl |
| G__rebuilt_.stl |
| H__rebuilt_.stl |
| I_2.STL |
| J_2__rebuilt_.stl |
| J__rebuilt_.stl |
| K_2__rebuilt_.stl |
| K__rebuilt_.stl |
| L_2__rebuilt_.stl |
| L__rebuilt_.stl |
| M__rebuilt_.stl |
| Number1.STL |
| Number2.STL |
| Number3.STL |
| Number4.STL |
| Number5.STL |
| Number9c.STL |
| N__rebuilt_.stl |
| O__rebuilt_.stl |
| P__rebuilt_.stl |
| Q__rebuilt_.stl |
| R__rebuilt_.stl |
| S__rebuilt_.stl |
| T_2__rebuilt_.stl |
| T__rebuilt_.stl |
| U__rebuilt_.stl |
| V__rebuilt_.stl |
| W_2__rebuilt_.stl |
| X__rebuilt_.stl |
| Y__rebuilt_.stl |
