I made a heathenish for my printer, but i designed the parts used so you can use the same parts for your own projects. Just measure the parts for your project correctly and you are good to go.
I used 4mm thick acrylic plastic for this project plus a lot of bolts. I made my own rivets for the hinges using a some scrap pla and a heat gun.
| Fillamenthållare.stl | 203.8KB | |
| Fillamenthållare_bak.stl | 96.6KB | |
| Gångjärn.stl | 1.5MB | |
| Gångjärn_1.stl | 678.6KB | |
| Gångjärn_2.stl | 833.4KB | |
| Handtag.stl | 3.2MB | |
| Handtag_platta.stl | 74.9KB | |
| hörn_med_hål.stl | 81.4KB | |
| hörn_ytter.stl | 82.0KB | |
| kant_med_hål.stl | 79.5KB | |
| kant_ytter.stl | 73.7KB |
