Update
I added a v2 version of the scad model with a few issues fixed. It should now be easier to customize.
I really liked the MozLove Box but found the customization quite complicated.
So I took my own heart shaped gift tag and used it as the base for the box. I also changed the magnet holder to a circular form because I had 8mm magnets at home.
I didn't enable the customizer because the locking pin is not fully integrated in the design. When customizing the scad file you need to double check if the pin and pinhole match.
| heart_box.scad | 2.4KB | |
| heart_box.stl | 358.5KB | |
| heart_box2.stl | 1.7MB | |
| heart_boxv2.scad | 2.5KB | |
| snaps.scad | 721.0B |
