Headset Holder Desk/kallax Clamp 3D Printer Model
The file 'Headset Holder Desk/kallax Clamp 3D Printer Model' is (stl) file type, size is 2.8MB.
The file 'Headset Holder Desk/kallax Clamp 3D Printer Model' is (stl) file type, size is 2.8MB.
I needed a headset holder to clamp to an IKEA Kallax shelf or desk and decided to modify a few thing I've already printed to fit the needs for that.
The clamp was made a little bit bigger and added one part of a dovetail joint while adding the other part to the headset rest. The screw thightener was made a bit thinner to better fit in between the shelf and the lower part of the clamp; screws stayed the same as original.
I‘d recommend to use the tighter screw.
Print everything with 20% infill (pattern like you wish) and supports except the screw, for the screw use 30% infill and a honeycomb pattern for better stability (and also supports).
| desk_clamp.stl | 814.8KB | |
| headset_rest.stl | 41.5KB | |
| screw.stl | 2.1MB | |
| screw_tighter.stl | 3.0MB | |
| tightening_1_screw_thin.stl | 255.9KB |
