Headphone Hook Improved For Different Shelf Thickness 3D Printer Model Free Download

Description Files (64)

Summary

This thing is an improvement/remix of the one made by "Misguided" on Feb 9, 2011.
http://www.thingiverse.com/thing:6256

The original design allows to hang the headphones under your office desktop. This new remix is based on the version 4 of his short and large hooks models, that have the bracket bend inwards slightly to reduce some of the sagging of the bracket under load.

This new remix includes the following improvements:

The lower lateral arch has increased its height to provide more protection to the headphones because with the original design I noticed that the headphones used to fall down if a near chair hit accidentaly to them. With this new protection the probability of falling down has been reduced.
The large and short hooks now have the same thickness in the sides of the bracket bend. They have been equalized to give more sturdiness to the whole structure.
The lower corner of the bracket bend has reduced its radius. Now it is equal to the upper corner. It should help to avoid the bending due to the weight of the headphone.
The STL files generated have reduced the size. Now they have 130 Kbytes approx.

To give more opportunities to the Thingiverse users of using this remix, different models has been designed for different thickness of shelves / desktops.

There are 4 files for each thickness:

xx.yy_large_high_headphone_hook_sxs.stl (large hook with lower lateral arch increased)
xx.yy_large_normal_headphone_hook_sxs.stl (large hook with original lateral arch)
xx.yy_short_high_headphone_hook_sxs.stl (short hook with lower lateral arch increased)
xx.yy_short_normal_headphone_hook_sxs.stl (short hook with original lateral arch)

The different thickness included are:

10.00 mm15.00 mm15.30 mm19.00 mm20.00 mm21.00 mm22.50 mm23.20 mm24.00 mm25.00 mm26.00 mm30.00 mm35.00 mm40.00 mm45.00 mm50.00 mm

The thing files list has been ordered by the thickness value to facilitate the search.

Please note that only the ones that have the 25.00 mm thickness have been printed/tested succesfully with the desktop I own which is 25 mm thick. Please do not hesitate to contact me if you find any error or you need another thickness not included. Although the ones included should be the most common I would do the best to generate the new thing file with the thickness you need in case of none of the rest helps you.

As Misguided said with his original design, it is recommended using a little bit of double-sided tape (or any temporary adhesive that won't damage the shelf) to attach the hook to the shelf.

Finally I want to give thanks to Misguided for his original design and I hope my work helps as well.

10.00_large_high_headphone_hook_sxs.stl	128.0KB
10.00_large_normal_headphone_hook_sxs.stl	127.2KB
10.00_short_high_headphone_hook_sxs.stl	128.8KB
10.00_short_normal_headphone_hook_sxs.stl	128.0KB
15.00_large_high_headphone_hook_sxs.stl	128.0KB
15.00_large_normal_headphone_hook_sxs.stl	127.2KB
15.00_short_high_headphone_hook_sxs.stl	128.8KB
15.00_short_normal_headphone_hook_sxs.stl	128.0KB
15.30_large_high_headphone_hook_sxs.stl	128.1KB
15.30_large_normal_headphone_hook_sxs.stl	127.3KB
15.30_short_high_headphone_hook_sxs.stl	128.9KB
15.30_short_normal_headphone_hook_sxs.stl	128.1KB
19.00_large_high_headphone_hook_sxs.stl	128.2KB
19.00_large_normal_headphone_hook_sxs.stl	127.4KB
19.00_short_high_headphone_hook_sxs.stl	129.0KB
19.00_short_normal_headphone_hook_sxs.stl	128.2KB
20.00_large_high_headphone_hook_sxs.stl	128.8KB
20.00_large_normal_headphone_hook_sxs.stl	128.0KB
20.00_short_high_headphone_hook_sxs.stl	129.7KB
20.00_short_normal_headphone_hook_sxs.stl	128.9KB
21.00_large_high_headphone_hook_sxs.stl	128.2KB
21.00_large_normal_headphone_hook_sxs.stl	127.4KB
21.00_short_high_headphone_hook_sxs.stl	129.0KB
21.00_short_normal_headphone_hook_sxs.stl	128.2KB
22.50_large_high_headphone_hook_sxs.stl	128.3KB
22.50_large_normal_headphone_hook_sxs.stl	127.5KB
22.50_short_high_headphone_hook_sxs.stl	129.1KB
22.50_short_normal_headphone_hook_sxs.stl	128.3KB
23.20_large_high_headphone_hook_sxs.stl	128.2KB
23.20_large_normal_headphone_hook_sxs.stl	127.4KB
23.20_short_high_headphone_hook_sxs.stl	129.0KB
23.20_short_normal_headphone_hook_sxs.stl	128.2KB
24.00_large_high_headphone_hook_sxs.stl	128.2KB
24.00_large_normal_headphone_hook_sxs.stl	127.4KB
24.00_short_high_headphone_hook_sxs.stl	129.1KB
24.00_short_normal_headphone_hook_sxs.stl	128.3KB
25.00_large_high_headphone_hook_sxs.stl	128.2KB
25.00_large_normal_headphone_hook_sxs.stl	127.4KB
25.00_short_high_headphone_hook_sxs.stl	129.0KB
25.00_short_normal_headphone_hook_sxs.stl	128.2KB
26.00_large_high_headphone_hook_sxs.stl	128.6KB
26.00_large_normal_headphone_hook_sxs.stl	127.8KB
26.00_short_high_headphone_hook_sxs.stl	129.6KB
26.00_short_normal_headphone_hook_sxs.stl	128.8KB
30.00_large_high_headphone_hook_sxs.stl	128.2KB
30.00_large_normal_headphone_hook_sxs.stl	127.4KB
30.00_short_high_headphone_hook_sxs.stl	129.1KB
30.00_short_normal_headphone_hook_sxs.stl	128.3KB
35.00_large_high_headphone_hook_sxs.stl	128.2KB
35.00_large_normal_headphone_hook_sxs.stl	127.4KB
35.00_short_high_headphone_hook_sxs.stl	129.0KB
35.00_short_normal_headphone_hook_sxs.stl	128.2KB
40.00_large_high_headphone_hook_sxs.stl	128.4KB
40.00_large_normal_headphone_hook_sxs.stl	127.6KB
40.00_short_high_headphone_hook_sxs.stl	129.2KB
40.00_short_normal_headphone_hook_sxs.stl	128.4KB
45.00_large_high_headphone_hook_sxs.stl	128.4KB
45.00_large_normal_headphone_hook_sxs.stl	127.6KB
45.00_short_high_headphone_hook_sxs.stl	129.3KB
45.00_short_normal_headphone_hook_sxs.stl	128.5KB
50.00_large_high_headphone_hook_sxs.stl	128.5KB
50.00_large_normal_headphone_hook_sxs.stl	127.7KB
50.00_short_high_headphone_hook_sxs.stl	129.3KB
50.00_short_normal_headphone_hook_sxs.stl	128.5KB

Headphone Hook Improved For Different Shelf Thickness 3D Printer Model

Summary

Tags

You might also like