Made this headphone hanger for the lamp next to my bed.
You need to print the parts seperatly, and therefor cannot print the stl directly.
It is design to be able to go around a pole that is a maximum of 1.9cm in diameter.
The angle of the holder is made for my lamp, but will probably work for most things, like a headphone lamp hanger / mount. If you with to have another angle, you can edit the files yourself, or leave a comment (then I maybe make another file).
The .3mf file is from Bambu Studio, and will maybe cause problems in other slicers, especially as scarf seam is on
I did not end up using the clip insert, but you may have a different experience.
EDIT: The small arm broke of due to the clip breaking. I think using the clip insert will help with distributing the load on both parts of the clip.
All the files are exported from Fusion360. I cannot test if the SketchUp and Inventer files work.
| arm_1.step | 120.1KB | |
| clip_insert.step | 18.5KB | |
| hanger.step | 373.0KB | |
| headphone_hanger.3mf | 2.8MB | |
| headphone_hanger.stl | 1.1MB | |
| headphone_hanger_-_fusion_archive.f3d | 616.0KB | |
| headphone_hanger_-_inventer2022.zip | 841.9KB | |
| headphone_hanger_-_sketchup.skp | 1.6MB |
