An adapter that allows 2.5 HDD to be mounted on a 3.5 HDD bracket.
You'll need two prints of this part, to fit on both sides of a 2.5 HDD. There is no left or right part, it can be used on either side.
Use eight M3 mounting screws (M3x5, 0.5 pitch). The 2 inner screw holes should be closer to the top. NB: Overtightening can cause the threads to strip.
The adapter can be mounted with the mounting screws on the side, top, or bottom.
Inspired by this thing by zdenek_o
| adapter.stl | 45.7MB |
