HD Plex 250W ATX PSU Bracket 3D Printer Model
The file 'HD Plex 250W ATX PSU Bracket 3D Printer Model' is (stl) file type, size is 237.8KB.
The file 'HD Plex 250W ATX PSU Bracket 3D Printer Model' is (stl) file type, size is 237.8KB.
I designed this mount to enable the HDPlex 250W PSU to be fitted to any case with an ATX PSU mount. I am hoping to drop the power usage of my home server by about ~10% with this power supply. Going from around 80% to over 90% efficiency.
Product details here: https://hdplex.com/hdplex-fanless-250w-gan-aio-atx-psu.html
The plug and PSU are mounted to the bracket using the included hardware. All 6 screws are used to spread the load of the power supply across the brackets weaker print lines.
The black screws are for the IEC "kettle cord" plug mount.
I have supplied holes for mounting in both orientations, depending on what the case uses. Seems to have enough strength to mount the PSU upside down.
Standard power supply screws can be used for the bracket mounting holes. I did find I had to round off the corners of the print holes for the screws with a blade to encourage initial thread engagement and pretapped the standard psu mount screws with the screws themselves to make installation easier.
Also included a mount for an 80mm fan, which may or may not be necessary.
UPDATE:
By request I have also included a design for dual PSU systems with 2 x 40mm fan mounts.
| ATX_PSU_HD_Plex_250W_Dual_PSU.stl | 588.3KB | |
| HD_Plex_250W_ATX_PSU_Bracket.stl | 447.2KB |
