Hawkeye Firefly Q6, full body, protective Case.
Added a GoPro type mount. Need to print FireFly Q6 Bottom GoPro.stl and FireFly Q6 GoPro Mount.stl. NOT TESTED.
2016-10-17 Added Caps and Extra Protection ring.
2016-10-10 Added V3.
List of changes:
Smoothed corners of the front LEDs windows.
Reinforced front ring/hood with cut corners.
Smoothed inside corner of the front ring/hood to let the air inside the case.
Air tunnels/reinforcers on top and bottom parts.
Vent holes on the bottom.
Reinforced strap loops.
Print in 100% infill.
You will need:
3DPrinter
Some filament.
4x M2x8mm bolts.
That's it.
If you like my work, if you want to see new designs, you can donate any amount for a filament.
| 25_degrees_mount.stl | 21.4KB | |
| FireFly_Q6_Bottom_GoPro.stl | 109.1KB | |
| FireFly_Q6_Bottom_V2.stl | 108.0KB | |
| FireFly_Q6_Bottom_V3.stl | 135.0KB | |
| FireFly_Q6_Case_Cap.stl | 59.9KB | |
| FireFly_Q6_Case_Model_V3_Do_Not_Print.stl | 275.0KB | |
| FireFly_Q6_Extra_Protection.stl | 61.2KB | |
| FireFly_Q6_Extra_Protection_Cap.stl | 63.9KB | |
| FireFly_Q6_GoPro_Mount.stl | 29.7KB | |
| FireFly_Q6_Top_V2.stl | 109.9KB | |
| FireFly_Q6_Top_V3.stl | 140.0KB |
