The Hawk Eye is an attempt to replicate the Deep Space Tourbillon of VIanney Halter. Although the main design is basically the same, I adapted it to a bigger scale and a clock with only one hand indicating minutes.
| Arduino_Box-1.STL | 226.4KB | |
| Arduino_Box-2.STL | 107.8KB | |
| Arduino_Box-3.STL | 660.7KB | |
| Arduino_Brace.STL | 14.1KB | |
| Assembly.STL | 37.6MB | |
| Guide.pdf | 2.5MB | |
| HY-Assembly.smg | 3.0MB | |
| HY-G-Gear-1.STL | 207.1KB | |
| HY-G-Gear-10.STL | 1.2MB | |
| HY-G-Gear-10_tip.STL | 727.7KB | |
| HY-G-Gear-11.STL | 668.9KB | |
| HY-G-Gear-12.STL | 1.1MB | |
| HY-G-Gear-13.STL | 733.7KB | |
| HY-G-Gear-14.STL | 1.1MB | |
| HY-G-Gear-15.STL | 559.2KB | |
| HY-G-Gear-16.STL | 1.4MB | |
| HY-G-Gear-17-1.STL | 1.6MB | |
| HY-G-Gear-17-2.STL | 1.6MB | |
| HY-G-Gear-17_joint.STL | 63.8KB | |
| HY-G-Gear-18.STL | 756.0KB | |
| HY-G-Gear-2.STL | 1.1MB | |
| HY-G-Gear-3.STL | 482.9KB | |
| HY-G-Gear-4.STL | 1.2MB | |
| HY-G-Gear-5.STL | 690.3KB | |
| HY-G-Gear-6.STL | 896.9KB | |
| HY-G-Gear-6_tip.STL | 716.8KB | |
| HY-G-Gear-7.STL | 1.1MB | |
| HY-G-Gear-8.STL | 800.2KB | |
| HY-G-Gear-9.STL | 1.6MB | |
| HY-HP-Beam-1.STL | 549.9KB | |
| HY-HP-Beam-2.STL | 542.3KB | |
| HY-HP-Bridge-1.STL | 1.5MB | |
| HY-HP-Bridge-2.STL | 1.6MB | |
| HY-S-Dial-1.STL | 664.2KB | |
| HY-S-Dial-2.STL | 450.3KB | |
| HY-S-Dial-3.STL | 450.3KB | |
| HY-S-Dial-4.STL | 472.3KB | |
| HY-S-Gear_Support.STL | 4.0MB | |
| HY-S-Motor_Support.STL | 111.8KB | |
| HY-S-Outer_Structure.STL | 1.5MB | |
| HY-S-Rack.STL | 3.8MB | |
| HY-S-Structural_Link.STL | 82.5KB | |
| HY-S-Structural_Reinforcement.STL | 1.3MB | |
| HY-S-Structure_Base.STL | 318.4KB | |
| HY-S-Structure_Main.STL | 9.9MB | |
| HY-T-Balance.STL | 4.4MB | |
| HY-T-Cage-1.STL | 2.2MB | |
| HY-T-Cage-2.STL | 2.8MB | |
| HY-T-Cage-3.STL | 1.3MB | |
| HY-T-Cage-4.STL | 2.5MB | |
| HY-T-Escape_Wheel.STL | 356.9KB | |
| HY-T-Impulse.STL | 466.4KB | |
| HY-T-Lever.STL | 578.8KB | |
| HY-T-Spiral_Spring.STL | 933.0KB | |
| HY-VP-Coil-1.STL | 2.2MB | |
| HY-VP-Coil-2.STL | 1.0MB | |
| HY-VP-Coil-3.STL | 121.1KB | |
| HY-VP-Cradle.STL | 5.8MB | |
| HY-VP-Hand.STL | 414.0KB | |
| HY-VP-Pulley-1.STL | 760.6KB | |
| HY-VP-Pulley-2.STL | 136.6KB | |
| HY-VP-Pulley_tip.STL | 96.0KB | |
| stepper.ino | 785.0B | |
| stepper_setting.ino | 1.1KB |
