Harley Quinn Cork Gun 3D Printer Model
The file 'Harley Quinn Cork Gun 3D Printer Model' is (STL) file type, size is 1.5MB.
The file 'Harley Quinn Cork Gun 3D Printer Model' is (STL) file type, size is 1.5MB.
This version of Harley's cork gun is loosely based off of the original one from the TV series. The main differences between them are the added detailing and the barrel length is longer in the show.
I posted the cut and uncut files. The Top and Body files are the uncut parts. The parts Pivot, Trigger, Grip, Body Part 1 and 2 are all just cut parts of the Body file.
To assemble just glue the body pieces together, than place the pin through the pivot and the hole on the Top part. To attach the cylinder place the cylinder pin through the hole in the barrel so that the fat end stays in the barrel and then just glue the pin into the hole in the cylinder.
All I did to complete the gun was to sand and bondo the entire gun. Then i used several coats of flat black primer. I then spray painted a rag with silver and wiped as much of the paint off as i could and then lightly rubbed it on the gun. For the cork i just bought a pack of thin cork from hobby lobby and cut 2 pieces and glued them together. You can also fit 20G shot gun shells into the cylinder for added weight and looks.
If you have any questions or want any modifications feel free to message me.
| Body.STL | 3.4MB | |
| Body_Part_1.STL | 898.0KB | |
| Body_Part_2.STL | 894.7KB | |
| Cylinder.STL | 2.2MB | |
| Cylinder_Pin.STL | 84.3KB | |
| Grip.STL | 1.2MB | |
| Pin.STL | 35.2KB | |
| Pivot.STL | 279.4KB | |
| Top.STL | 338.1KB | |
| Top_Part_1.STL | 276.3KB | |
| Top_Part_2.STL | 1.6MB | |
| Trigger.STL | 1.5MB |
