Hario V60/Switch Conical Lid 3D Printer Model
The file 'Hario V60/Switch Conical Lid 3D Printer Model' is (stl) file type, size is 183.3KB.
The file 'Hario V60/Switch Conical Lid 3D Printer Model' is (stl) file type, size is 183.3KB.
A lid I made in order to sit on top of my V60 in my travel coffee kit, so that I can neatly store other items inside the cone and then stack things on top. Would also work as a lid to retain heat in the Switch versions of the V60 if printed in a suitable filament.
The walls of the lid match the angle of the V60 so they are less prone to slipping during transit. There is a small amount of wiggle room to allow some clearance with the ribbed walls of the inside.
The regular STL files have a rim of 0.6mm thickness and a conical depth of 1mm (total 1.6mm), while the deep files have a conical depth of 2mm (total 2.6mm) for a slightly more snug fit.
Measurements were taken for the 02 size and scaled up and down by 20% to approximate the sizes for the 01 and 03 V60s respectively, so those two sizes may need some tweaking.
If you scale the STLs to match your brewer or if anyone can help me by taking some exact measurements of their V60, let me know!
| v60_Size_01_Lid.stl | 165.8KB | |
| v60_Size_01_Lid_-_deep.stl | 56.7KB | |
| v60_Size_02_Lid.stl | 165.8KB | |
| v60_Size_02_Lid_-_deep.stl | 56.7KB | |
| v60_Size_03_Lid.stl | 165.8KB | |
| v60_Size_03_Lid_-_deep.stl | 56.7KB |
