Hardware Crypto Wallet Using A Raspberry Pi Zero Enclosure Design | DIY Project 2022 3D Printer Model
The file 'Hardware Crypto Wallet Using A Raspberry Pi Zero Enclosure Design | DIY Project 2022 3D Printer Model' is (STL) file type, size is 4.3MB.
The file 'Hardware Crypto Wallet Using A Raspberry Pi Zero Enclosure Design | DIY Project 2022 3D Printer Model' is (STL) file type, size is 4.3MB.
Assembling Video:- https://youtu.be/Yd29T5TbZRY
This project is designed to hold your cryptocurrency in a hardware wallet. The Enclosure Design has two main covers. We used M2.5 screws for the fitting; you need 8 screws to fix all components. (For more information about the screws, please refer to the PDF file) To secure the device, you must use an uncommon screw drive type for the cover fittings.
Part List:-
Electronics and programming Information:-
https://www.pitrezor.com/2018/02/pitrezor-homemade-trezor-bitcoin-wallet.html
Contact us to design your enclosure design.
Website:- https://www.skw.lk/
| BC_D6.STL | 2.3MB | |
| D6_-_switch_1_D6-1.STL | 2.1MB | |
| D6_-_switch_2_D6-1.STL | 761.1KB | |
| D6_-_switch_3_D6-1.STL | 1.2MB | |
| D6_-_TC_D6-1.STL | 2.9MB | |
| TC_D6_without_logo.STL | 2.6MB |
