Need to add a pause during the slicing, so the magnet can be inserted during the print.
Hard drive magnet are kidney form like https://www.thingiverse.com/thing:4858583
Hard drive magnet are strong magnet... be careful!
Need to add support for the trex head, but no support for the magnet.
The fride-magnet-[Something]_2.17.stl is for magnet less than 2.17mm thick.
The fride-magnet-[Something]_3.17.stl is for magnet less than 3.17mm thick.
Tips: if you have a magnet tower, to separate them, use some office wood drawer and gently sidle close.
Update: 2023_07_02: fride-magnet-dino-hanger_3.17.stl and fride-magnet-dino-pin_2.17.stl reupload. The inside magnet was somehow bad.
| fride-magnet-dino-hanger_2.17.stl | 172.2KB | |
| fride-magnet-dino-hanger_3.17.stl | 176.8KB | |
| fride-magnet-dino-pin_3.17.stl | 34.0KB | |
| fride-magnet-dino-pin_long_2.17.stl | 40.1KB | |
| fride-magnet-dino-pin_long_3.17.stl | 40.1KB |
