If your tray is bigger than 14mm tall and 110mm wide you might have fitting problems.
I recommend printing a test first (or pause and park the toolhead) with like 1cm of the cage, and try the fitment I've included a 1cm fit test for those interested.
Even more spacing!
Thanks to imnotjames for pointing out I didn't leave room for any tolerances in my model. I updated it adding 0.6 mm between the top of the tray and the bottom of the rail.
I also added more mounting holes for the top SDD, because the original holes probably didn't have any room for the SATA connectors.
I haven't found a printable 3D model of the drive cage for several Fractal Design cases, so here it is. I haven't printed it personally because I don't need it. I just modeled while it was out of the Meshify 2 case I just bought because I'm waiting on other parts.
I hope somebody finds it useful and that the holes I modeled really fit. :P
Print it face down so you should not need any supports at all.
I based my model off this Type B tray:
| Fit_test.stl | 56.7KB | |
| HDD_Cage_v2.3mf | 206.2KB | |
| HDD_Cage_v2.f3z | 15.6MB | |
| HDD_Cage_v2.stl | 873.5KB | |
| HDD_Cage_v3.3mf | 167.7KB | |
| HDD_Cage_v3.f3z | 16.9MB | |
| HDD_Cage_v3.stl | 689.1KB |
