Hard Case For The SparkGap Labs MCT-73 3D Printer Model
The file 'Hard Case For The SparkGap Labs MCT-73 3D Printer Model' is (stl,f3d) file type, size is 2.1MB.
The file 'Hard Case For The SparkGap Labs MCT-73 3D Printer Model' is (stl,f3d) file type, size is 2.1MB.
This is a case to protect the SparkGap Labs MCT-73.
https://sparkgaplabs.com/index.php
You can print one as shown or modify the f3d file in Fusion 360 to suit your needs.
I used 1mm single sided EVA foam to make everything snug and prevent rattles.
I used PETG for the latches so they had a little flex and PLA for the case.
6x M3 x 30mm Bolts are needed for the hinge and latch.
Credit to the creator of the Parametric Rugged Box that this case was modified from.
https://www.printables.com/model/258431-rugged-box-parametric
Big thanks to Brian from SparkGap labs for making such an enjoyable kit!
FAQ:
• I do not sell prints. Your best bet is download the files and find a local printing company in your area.
• I can not customize this for you, Fusion 360 is available free for Hobby use and only needs a few hours of learning to get you enough knowledge to customize this design.
• You can not sell this design, the original author of the case does not grant commercial rights nor do I. If I see this case in your ebay or Etsy store etc I will report your store for creative commons violation.
| Box_-_Bottom.stl | 256.1KB | |
| Box_-_Latch.stl | 69.3KB | |
| Box_top.stl | 262.8KB | |
| MCT-73_box.f3d | 2.0MB |
