Harbor Freight Sand Blaster Glass Spacer Frame 3D Printer Model
The file 'Harbor Freight Sand Blaster Glass Spacer Frame 3D Printer Model' is (stl) file type, size is 101.9KB.
The file 'Harbor Freight Sand Blaster Glass Spacer Frame 3D Printer Model' is (stl) file type, size is 101.9KB.
Spacer for glass frame when using 1/4" safety glass with disposable 1/8" glass sheet under it.
My original glass was damaged.
I found a ¼" thick piece of safety glass locally adding 1/16" of an inch thickness. Then I decided to switch from the plexi overlay (since I now have the safety glass) and I added an 1/8" blaster side disposable glass… adding another 1/16".
Mine is the 62144 model.
I broke the print up to be a puzzle so it fits on my print bed.
There are recess holes in if you are using sheet metal nuts. If the alignment is off a Dremel can adjust.
It adds 2.6mm to the thickness.. as it assumes the foam compresses down to 1/16" of an inch.
Mine was 646mm wide and 343mm wide (outside dimensions). This spacer has a brim around the existing frame.
I suggest printing a corner first and check the fit.
I printed mine in black PETG.
| window_bottom_left_2-6.stl | 79.8KB | |
| window_bottom_right_2-6.stl | 79.0KB | |
| window_center-bottom_2-6.stl | 70.8KB | |
| window_center-top_2-6.stl | 70.8KB | |
| window_top_left_2-6.stl | 80.6KB | |
| window_top_right_2-6.stl | 79.8KB |
