Harbor Freight Modular Toolbox Trays 3D Printer Model Free Download

Description Files (27)

Summary

Tray System for Harbor Freight Modular Rolling Toolbox

This set of trays is designed specifically for the Harbor Freight Modular Rolling Toolbox. They are practical for various uses, from organizing tools to holding and transporting games like Heroscape.

Key Features

Custom Fit: Each tray has notches that align with the toolbox's channels, preventing movement during transport.
Durable Construction: These trays are thick and rugged, suitable for tools or gaming components.
Tapered Toolbox Design: The toolbox is slightly wider at the top than at the bottom. This tapering means most trays fit only in specific vertical positions, which are marked with numbers for proper stacking.
Smooth Operation: The trays slide in and out with some tolerance but may feel tight if the toolbox isn’t on a level surface. However, they are never too tight to remove.

Tray Placement and STL Notes

Tray Configuration:
- All provided STL files are designed for the right-hand side of the toolbox.
- Each tray is split into a front and back piece.
- To use on the left-hand side, mirror the tray side-to-side in your slicer software. Do not mirror front-to-back, as two trays won’t fit correctly in that orientation.
Trays 1, 2, and 3 (Lower Levels):
- These trays are narrower and leave a center gap if printed for both sides of the toolbox.
- Currently, there is no version to fill the entire toolbox width. If you’d like such a design, leave a comment to express interest for future updates.
Trays 4 and 5 (Top Levels):
- Numbered Trays: Match the lower trays in width and stack with the same center gap.
- Tray Top Narrow: Similar to numbered trays but without embossed numbers.
- Tray Top Mid: Overhangs slightly over the lower trays. These work perfectly with “tray top wide” trays when placed at the same level on the opposite side of the toolbox.
- Tray Top Wide: Overhangs more than “tray top mid” trays. Use them in conjunction with "tray top mid" trays for a full-width configuration.
- Tray Top Extra-Wide Short: Extra-wide but shallow trays for small parts. Three of these (60mm) stack slightly higher than one "tray top narrow" tray (56mm). These do not fit with “tray top mid” or “tray top wide” trays.

Additional Notes

Customization Options: If you need trays to fully fill the toolbox or have other specific requirements, leave a comment, and I’ll consider designing based on demand.
Assembly Tips: Ensure trays are positioned in their correct vertical order as indicated by the numbers to accommodate the toolbox’s tapered shape.

This tray system simplifies organization and maximizes the functionality of your Harbor Freight Modular Rolling Toolbox for various use cases.

Updates

Split Files: I have split the larger trays into halves. All trays can be printed on a Ender3 (220x220x250). The split trays require you to glue them together, but the edges are beveled to assist with lining up the edges. All the split trays have "Split_Half" in their filename.

HF_Toolbox_tray_1-Split_Half_1.stl	34.6KB
HF_Toolbox_tray_1-Split_Half_2.stl	7.7KB
HF_Toolbox_tray_1.stl	40.1KB
HF_Toolbox_tray_2_back.stl	40.4KB
HF_Toolbox_tray_2_front.stl	45.3KB
HF_Toolbox_tray_3_back.stl	76.1KB
HF_Toolbox_tray_3_front.stl	71.6KB
HF_Toolbox_tray_4_back.stl	28.7KB
HF_Toolbox_tray_4_front.stl	28.5KB
HF_Toolbox_tray_5_back.stl	55.4KB
HF_Toolbox_tray_5_front.stl	55.2KB
HF_Toolbox_tray_top_extra-wide_short_back-Split_Half_1.stl	5.4KB
HF_Toolbox_tray_top_extra-wide_short_back-Split_Half_2.stl	7.2KB
HF_Toolbox_tray_top_extra-wide_short_back.stl	10.4KB
HF_Toolbox_tray_top_extra-wide_short_front-Split_Half_1.stl	8.1KB
HF_Toolbox_tray_top_extra-wide_short_front-Split_Half_2.stl	5.7KB
HF_Toolbox_tray_top_extra-wide_short_front.stl	12.0KB
HF_Toolbox_tray_top_mid_back.stl	9.7KB
HF_Toolbox_tray_top_mid_front.stl	9.7KB
HF_Toolbox_tray_top_narrow_back.stl	7.3KB
HF_Toolbox_tray_top_narrow_front.stl	7.3KB
HF_Toolbox_tray_top_wide_back-Split_Half_1.stl	6.7KB
HF_Toolbox_tray_top_wide_back-Split_Half_2.stl	6.5KB
HF_Toolbox_tray_top_wide_back.stl	11.2KB
HF_Toolbox_tray_top_wide_front-Split_Half_1.stl	6.5KB
HF_Toolbox_tray_top_wide_front-Split_Half_2.stl	6.5KB
HF_Toolbox_tray_top_wide_front.stl	11.2KB

Harbor Freight Modular Toolbox Trays 3D Printer Model

Summary

Key Features

Tray Placement and STL Notes

Additional Notes

Updates

Tags

You might also like