Harbinger Of Damnation Test Parts 3D Printer Model
The file 'Harbinger Of Damnation Test Parts 3D Printer Model' is (stl) file type, size is 26.9MB.
The file 'Harbinger Of Damnation Test Parts 3D Printer Model' is (stl) file type, size is 26.9MB.
Try out some sample parts from the Harbinger of Damnation Kickstarter.
3D print your own spacehulk
Both Supportless printing FDM and pre-supported resin versions included.
Use the Pre-supported files for resin printing - if you want to use your own supports use the resin pillar - it has different tolerances for resin printing for the best connections
If you like what you see find out more over at kickstarter by following the below:
https://www.kickstarter.com/projects/watcorpdesigns/harbinger-of-damnation?ref=eepqck
| 90_corridor_pillar_-_FDM.stl | 6.2MB | |
| 90_corridor_pillar_resin.stl | 6.2MB | |
| 90_corridor_pillar_resin_supported.stl | 2.3MB | |
| plain_wall.stl | 1.7MB | |
| plain_wall_supported.stl | 8.4MB | |
| std_corridor_floor_supported.stl | 15.5MB | |
| std_corridor_floor_wide.stl | 7.0MB | |
| wall_4.stl | 6.1MB | |
| wall_4_supported.stl | 8.8MB |
