I designed this hard carry case for my Mobula8 to stop it getting squashed and the antenna getting constantly bent in the original box.
This case is robust and has a simple catch at the front and a strong hinge at the back.
The lid also has a pocketed area so the antenna is not bent or moved when the lid is closed.
For the hinge use two M3x30mm screws (M3x25mm will also work)
For the front catch use M3x18mm screws. Other sizes will probably work.
I used some 2mm thick soft adhesive foam squares to hold the drone in place. The drone does not move, rattle of shake.
There are 2 different lids. One is contoured and requires much more support, I suggest printing on its end. There is another lid that is the same shape as base and requires minimal print.
| Catch.STL | 1.0MB | |
| Mobula8_Base.STL | 3.6MB | |
| Mobula8_Lid.STL | 2.8MB | |
| Mobula8_Lid_Contoured.STL | 2.9MB |
