This is an easier to print version of my other case with minimal rads and less support needed,
I designed this hard carry case for my Mobula8 to stop it getting squashed and the antenna getting constantly bent in the original box.
This case is robust and has a simple catch at the front and a strong hinge at the back.
The lid also has a pocketed area so the antenna is not bent or moved when the lid is closed.
For the hinge use two M3x30mm screws (M3x25mm will also work)
For the front catch use M3x14mm screws. Other sizes will probably work.
I used some 2mm thick soft adhesive foam squares to hold the drone in place. The drone does not move, rattle of shake nor does it stress/bend the frame.
| Catch.STL | 1.0MB | |
| Mobula8_Base_Chamfered_Edges.STL | 3.3MB | |
| Mobula8_Lid_Chamfered_Edges.STL | 2.8MB |
