Update: I have moved to prusaprinters at
https://www.prusaprinters.org/social/215089-voyajer !
Any updated and new designs will be only uploaded there.
Two piece shell for the usb Li-Hv lipo charger that comes with the Happymodel Mobula6. It has holes for the charging status lights (center for Li-Hv, end for normal Lipo batteries).
This model requires gluing on the chamfered edges and optionally recommends a dab of glue on the underside of the PCB.
You may need to clip the pins on the connectors if they protrude further than 1 mm from the bottom of the PCB.
| 1S_Charger_Bottom.stl | 3.0KB | |
| 1S_Charger_Top.stl | 72.7KB |
