Hanna Checker Cuvette Rack 3D Printer Model
The file 'Hanna Checker Cuvette Rack 3D Printer Model' is (STL) file type, size is 7.4KB.
The file 'Hanna Checker Cuvette Rack 3D Printer Model' is (STL) file type, size is 7.4KB.
This is a cuvette test tube holder for the Hanna Checker cuvettes. Everything presses together and I have had to use no glue for my racks. You might have to sand the legs if your printer likes to print a brim on the bottom surface. Print 4 of the Legs and 2 of the Top-Bottom Racks. Print the rack top and bottom flat. I used 100% infill on the legs and 15% infill on the racks. The cuvettes that came with my Hanna Checkers fit in the rack by friction. It is a tight fit but not too tight.
| Rack_Legs.STL | 684.0B | |
| TOP-Bottom_Rack.STL | 45.2KB |
