This is my take on the HANKA Robotics Spider Tank from Ghost In The Shell. I included 2 heads - 1) the original 1995 anime version with horizontal slit eyes and 2) the 2017 version is completely different.
For the joints, I was recommended to use heat shrink tubing around the clips. Insert the ball and then shrink the tubing around the clips. This way, the joints will stay firm for a long time.
The body was meant to be joined by rare earth magnets and a metal strip so you could pose it. However, CA glue should do.
Most if not all FDM machines will not be able to print the barrels of the minigun well. I plan on DLP printing these parts. There will be an updated with improved leg toes and minigun just for FDM.
Known Fixes:
1 - Heads need gun position holes - Added 7.17.18
2 - Toes on legs need to be adjusted so it sits properly - Added 7.17.18
3 - Minigun redesign for FDM printing - Added 7.21.18
4 - Remeshed body and head - Added 7.21.18
AlignCube.stl | 684.0B | |
AmmoBelts.stl | 67.1KB | |
BackBody-Dots.stl | 152.4KB | |
BackBody-Middle.stl | 3.4MB | |
BodyMiddleV2.stl | 3.4MB | |
Body_v4.stl | 1.0MB | |
Eye.stl | 72.0KB | |
F-InnerLeg-L.stl | 720.3KB | |
F-InnerLeg-LS.stl | 741.5KB | |
F-InnerLeg-R.stl | 720.3KB | |
F-InnerLeg-RS.stl | 741.5KB | |
FDMGun.stl | 17.2MB | |
FinalTankAssembly-Ref.stl | 38.6MB | |
FrontLeg-ShortToe.stl | 1.3MB | |
FrontLeg_x2.stl | 1.3MB | |
Guns.stl | 17.7MB | |
HatchHandle.stl | 13.2KB | |
Head_1995+GunMount.stl | 3.0MB | |
Head_2017+GunMount.stl | 3.0MB | |
ImprovedFanCover.stl | 72.2KB | |
InnerLegS_x4S.stl | 856.8KB | |
InnerLeg_x4.stl | 756.1KB | |
Leg-ShortToe.stl | 1.3MB | |
Leg_x4.stl | 1.3MB | |
NewBackBody7.20.18.stl | 4.2MB | |
TA08-Mk2.stl | 42.5MB | |
TankAssembly.stl | 33.1MB |