Hanging Wooden Lamp 13in
This was designed as a wooden hanging lamp, reminiscent of a pinecone. It can be laser or cnc cut from 4.3mm or 5.1mm plywood (two versions are included depending on thickness). I have also included files to 3d print, but this has not been tested.
This uses a common lamp cord and standard lightbulbs, see photos. The hole for the lampshade screw on the lamp end is 40mm, or 1.57in. The lamp cord also needs to be threaded through the top ring before final assembly.
| 13in_Pinecone_Assembly_4.3.stp | 739.9KB | |
| 13in_Pinecone_Assembly_5.1.stp | 722.7KB | |
| cut_file_4.3.dxf | 325.3KB | |
| cut_file_5.1.dxf | 325.8KB | |
| Rib_A_4.3.stl | 62.4KB | |
| Rib_A_5.1.stl | 62.4KB | |
| Rib_B_4.3.stl | 58.9KB | |
| Rib_B_5.1.stl | 58.9KB | |
| Ring_A_4.3.stl | 45.4KB | |
| Ring_A_5.1.stl | 65.5KB | |
| Ring_B_4.3.stl | 63.6KB | |
| Ring_B_5.1.stl | 59.7KB | |
| Ring_C_4.3.stl | 75.9KB | |
| Ring_C_5.1.stl | 75.9KB | |
| SHINGLE_1_4.3.stl | 16.5KB | |
| SHINGLE_1_5.1.stl | 16.5KB | |
| SHINGLE_2_4.3.stl | 16.5KB | |
| SHINGLE_2_5.1.stl | 16.5KB | |
| SHINGLE_3_4.3.stl | 16.5KB | |
| SHINGLE_3_5.1.stl | 16.5KB | |
| SHINGLE_4_4.3.stl | 17.1KB | |
| SHINGLE_4_5.1.stl | 17.1KB |
