OpenScad Files with 20 parameters for your hanging bird feeder
Additional material needed:
6x wood slats for roof and food container ( in the STL: 39mm x 5mm x 300mm)
1x square wood rod longer than the 6 wood slats ( in the STL: 4.5mm x 4.5mm x 320mm)
2x square wood rod as connector between top and bottom part ( in the STL: 4.5mm x 4.5mm x 120mm)
| BirdFeeder.scad | 5.8KB | |
| FoodContainer.stl | 44.1KB | |
| Hanger.scad | 1.3KB | |
| Hanger_End.stl | 23.4KB | |
| Roof.stl | 44.7KB |
