Handy Jewelry Collector 3D Printer Model
The file 'Handy Jewelry Collector 3D Printer Model' is (stl) file type, size is 1.9MB.
The file 'Handy Jewelry Collector 3D Printer Model' is (stl) file type, size is 1.9MB.
Super easy printing!
The hand is placed on the tapered pin of the tray. You can glue them* if you prefer, but this is not necessary.
The bowl is placed on the recess in the hand. Also with this one: If you prefer, you can glue them, but this is not necessary. (Although I recommend a bit of double sided tape or gluing* for a solid placement.)
Print all parts as positioned in the STL files. Use your own favorite settings for a sleek looking result. With my print I used a 0.4 nozzle, layer height 0.2 and infill 15%. None of the parts require a support. For the bowl you can use a small brim (I used none).
The different parts can easily be printed in a different colour.
* The hand can also be rotated 180° for a different orientation. However, then the Bowl cannot be used. (see foto) If you want to be able to change later, don't glue!
tip: For a personal touch paint the nails!
.
.
(made for the contest "Ring Holders" at Printables).
.
.
The hand is a variation on a model I used before for my design "Your Unfolding Heart". It is a model made by Sebastien L. The original is at GrabCad (used with permission)
| Bowl.stl | 680.8KB | |
| Hand.stl | 2.4MB | |
| Tray.stl | 1.2MB |
