I designed a couple of stands for some real nice planetary objects designed by other people here.
You can use one stand or the other, OR you can use both like I did (I prefer both because it puts the whole puck light inside the objects.
One stand is just a plain old circular stand with a hole in it to run wires if you wish.
The second stand is a set of hands to hold the globes. I dropped in a block and added a hole to run wires if you are so inclined to run your light from a wall socket/brick.
The light I used is this one: https://www.amazon.com/gp/product/B01E186V9U
I hate batteries, so I cut up a USB cable and soldered it to the terminals of that light. (5v verses battery of 4.5v, so no big deal). Now it runs off a USB brick.
In particular, I designed these for these designs:
https://www.thingiverse.com/thing:2747956
and
https://www.thingiverse.com/thing:2531838
Be aware that with Jupiter you need to take a little off of the bottom to have the puck (light) fit inside.
| 140_Globe_Stand.stl | 50.2KB | |
| Hands_C.stl | 6.3MB |
