Hands-Free Cabinet Door Opener 3D Printer Model
The file 'Hands-Free Cabinet Door Opener 3D Printer Model' is (stl) file type, size is 11.4MB.
The file 'Hands-Free Cabinet Door Opener 3D Printer Model' is (stl) file type, size is 11.4MB.
The model throws some errors with extraneous faces due to the quick editing, but it sliced and printed fine using cura!
From the original this is remixed from:
"This is a hands-free door-opener for doors that don't latch, like bathrooms in an office or public environment. You use your foot to open the door rather than grabbing the handle. I saw metal versions of these on many of the bathroom doors at Penn State this year and thought it was clever. With the COVID-19 pandemic currently ongoing, I thought some might find this useful.
The mouting holes are sized for #10 screws.
I printed this with a relatively thick shell (2.4mm). I did this for strength; you have to be concerned that someone will put all of their weight on it. That's also why I used PETG+ instead of PLA. You can use PLA for sure, but don't be surprised if you have to print another one someday if someone puts too much weight on it."
| doorSmaller.stl | 27.5MB |
