I spent many hours developing this model.
I used blue prints and photos of the Herald to recreate the best model I could.
It is scaled at 1/72.
You will need Plastic Weld to glue it all together.
Please share your builds if you can. I am still painting mine, but will share as soon as complete.
You will need to print 4x Wing pins.
The complete assembly is to show how it all goes together, do not print that one.
I suggest printing the Nose on pointing up, the tail pointing down, mid section pointing down and wings on there inner sections.
Use platform supports and higher fill for the Props.
Complete_Assembly.stl | 1009.4KB | |
Herald_New_nose_v6.stl | 86.5KB | |
Left_Prop.stl | 160.0KB | |
Left_Wing_1-72.stl | 46.6KB | |
Mid_Section_No_Gear_V4_stand.stl | 366.4KB | |
Right_Prop.stl | 160.2KB | |
Right_Wing_1-72.stl | 46.6KB | |
Stand_v2.stl | 170.6KB | |
Tail_Section_1-72.stl | 119.2KB | |
Wing_Pin.stl | 4.6KB |