Handle for Weber kettle lid damper. You will also need a M5 x 16 machine screw, M5 nut, some washers, glue, and silicon caulk. Drill a 3/16 hole to the damper (see pic 3). Glue the M5 nut into the handle. I use several small washers and a dab of silicon between then or where the screw contacts the damper to act as insulation so the handle does not get too hot. I also painted the handle with enamel paint to make it a little more heat resistant.
| weber_damper_handle.stl | 51.4KB |
