Handle (eg. For Toilet Brush) 3D Printer Model
The file 'Handle (eg. For Toilet Brush) 3D Printer Model' is (stl,scad) file type, size is 1.0MB.
The file 'Handle (eg. For Toilet Brush) 3D Printer Model' is (stl,scad) file type, size is 1.0MB.
Our toilet brush had a rather thin handle bar which was not so nice to handle, so I designed a handle for it which is more comfy to hold.
The design consists out of four parts: Two side shells which enclose and hold the original handle bar, a ring on the bottom and a knob on the top. The parts are assembled via threads, so no glue or screw is required. The threads are conical to hold the original handle bar tightly. Although the tolerances between the grip and the original handle bar are small, I inserted some small thin strips of foam to avoid slipping of the handle bar in the handle.
Of course the use of this handle or grip is not restricted to toilet brushs...
| handle_for_toilet_brush_12mm_105mm.stl | 688.9KB | |
| handle_for_toilet_brush_12mm_120mm.stl | 695.1KB | |
| handle_for_toilet_brush_14mm_105mm.stl | 683.9KB | |
| handle_for_toilet_brush_14mm_120mm.stl | 693.1KB | |
| home_handle_for_toilet_brush.scad | 24.5KB |
